The following information is required for a new SPS.

Name. See: Common Parameters.

Description. See: Common Parameters.

Order Index. See: Common Parameters.

Rotation DeltaX. This parameter is the distance across track from the centre of the SPS to the rotation point for the SPS.

Annotated SPS Rotation DeltaX.png

Rotation DeltaY. This parameter is the vertical distance from the base of the SPS to the rotation point for the SPS.

Annotated SPS Rotation DeltaY.png

RotationHigh. This parameter is the maximum angle in degrees that the SPS can rotate around a parallel axis to the track from the rotation point (defined with RotationDeltaX and RotationDeltaY).

Annotated SPS RotationHigh.png

RotationLow. This parameter is the minimum angle in degrees that the SPS can rotate around a parallel axis to the track from the rotation point (defined with RotationDeltaX and RotationDeltaY).

Annotated SPS RotationLow.png

Rotation Increment. This parameter defines the increment in degrees that the user can rotate the SPS.

Z Rotation High. This parameter is the maximum angle in degrees that the SPS can rotate around the vertical axis from the centre of the SPS.

Annotated SPS Z RotationHigh.png

Z Rotation Low. This parameter is the minimum angle in degrees that the SPS can rotate around the vertical axis from the centre of the SPS.

Annotated SPS Z RotationLow.png

For Attachment Point. See: Common Parameters.

Template Type. See: Common Parameters.

This parameter must be ‘Fixed’ for SPS.