The following information is required for a new bracket slot.

Name. See: Common Parameters.

The name for the slot is defined in the Slots Naming Guide.

Description. See: Common Parameters.

Order Index. See: Common Parameters.

OffsetX. This parameter is the distance across the track from the centre of the mast/drop tube to the centre of the bracket slot hole where the wire support will attach.

A positive value must be used for all typical catenary brackets, however, back-to-back catenary brackets will require both a bracket slot with a positive OffsetX value and a bracket slot with a negative OffsetX value.

OffsetY. This parameter is the distance along the track from the centre of the mast/drop tube to the centre of the bracket slot hole where the bracket slot part will attach.

A positive value of OffsetY will move the bracket slot to the right when facing towards a bracket from across the track.

A negative value of OffsetY will move the bracket slot to the left when facing towards a bracket from across the track.