The following information is required for a new adapter plate.

Name. See: Common Parameters.

This name will never be shown in Lineardraft, and is only used for Zebraware engineers.

Description. See: Common Parameters.

This information will never be shown in Lineardraft, and is only used for Zebraware engineers.

Top Gap. This parameter is the distance between the top of the adapter plate and the base of the mast.

Bottom Gap. This parameter is the distance between the bottom of the adapter plate and the top of the foundation.

Thickness. This parameter is the thickness of the adapter plate.

Adapter Plate Gap Annotated.png

Template Type. See: Common Parameters.

This parameter must be ‘Fixed’ for adapter plates.